Mapping noise to improve quantum measurements

Mapping noise to improve quantum measurements

One of the biggest challenges in quantum technology and quantum sensing is “noise”–seemingly random environmental disturbances that can disrupt the delicate quantum states of qubits, the fundamental units of quantum information.

Looking deeper at this issue, JILA Associate Fellow and University of Colorado Boulder Physics Assistant Professor Shuo Sun collaborated with Andrés Montoya-Castillo, Assistant Professor of Chemistry, and his team to develop a new method for better understanding and controlling this noise, potentially paving the way for significant advancements in quantum computing, sensing, and control.

Their new method, which uses a mathematical technique called a Fourier transform, was published in the journal npj Quantum Information.

The problems with noise

While some noise sources, like music, can be enjoyable, others, such as the sounds of traffic or a bustling city, can be distracting and even lead to health issues over time. At a microscopic level, noise can pose significant challenges. Even the smallest fluctuations in room temperature or floor vibration, or the qubit system’s inherent instability, can disrupt a qubit’s coherence, causing it to lose its quantum state in a process known as decoherence.

“Lots of quantum technologies that people are very excited about, like quantum computers and quantum sensors, face a practical limitation, which is implementation on a larger scale with higher sensitivity,” explains CU Boulder Physics graduate student and co-first author of the paper, Nanako Shitara, who works in Montoya-Castillo’s group.

“This is because these quantum systems, or qubits, are very sensitive to fluctuations in the surrounding fields, and they often interact with each other.”

Not only does the noise affect the measurements of fragile systems like an ultra-precise quantum sensor, but it can also make the system less manageable.

Shitara elaborates, “The problem becomes a question of control: you want to control how a qubit reacts to certain kinds of noise. Basically, you want it to react to the right signals very well while it ignores other noise sources.”

Understanding the sources of this noise and finding ways to mitigate it is crucial for developing reliable quantum devices, such as quantum computers or sensors.

“Understanding the noise environment of a qubit is not only important for noise mitigation but also serves as a valuable probe for materials,” Sun explains. “In the latter case, the qubit acts as a sensor, providing insights into the behavior of the surrounding material environment.”

Traditional noise characterization

To study and control this noise, scientists have traditionally used a method called Dynamical Decoupling Noise Spectroscopy (DDNS). This method involves applying precise pulses to the qubits and observing how they respond.

“Dynamical decoupling was originally, and still is, used for making the coherence times longer in qubits,” adds Shitara. “It turns out that if you apply very short light pulses onto a qubit, that is interacting with its environment, in some periodic manner, that helps the qubit’s coherence survive longer through some sort of effective decoupling.”

More recently, dynamical decoupling was repurposed as a noise spectroscopy method (hence DDNS) to measure and characterize the noise among the qubits. Though effective, DDNS is complex and requires applying a large number of almost instantaneous laser pulses. It also makes several assumptions about the underlying noise processes, making it cumbersome and less practical for widespread use.

Shitara also elaborated that the DDNS method has minimum and maximum frequency limits for noise spectrum reconstruction due to physical constraints, potentially causing someone to miss interesting phenomena. “You can see that the lowest frequency at which they reconstruct the spectrum can be actually quite high, depending on the implementation,” she adds.

Looking at the challenges of DDNS, Shitara, Sun, Montoya-Castillo, and CU Boulder postdoctoral researcher Arian Vezvaee proposed a new method that required fewer laser pulses and utilized a mathematical technique known as the Fourier transform.

Transforming noise maps

The new method, Fourier Transform Noise Spectroscopy (FTNS), offers a straightforward yet powerful way to analyze the noise affecting qubits by focusing on the qubits’ coherence dynamics. Coherence measures how well a qubit maintains its quantum state, which is critical for its performance in quantum computations.

These measurements are typically done through simple experiments like Free Induction Decay (FID) or Spin Echo, which start the qubit in a specific initial state and let its coherence decay freely over time, with zero or one intermediate pulses applied during the decay, respectively.

Once these time-based measurements are collected, the data is treated using the Fourier transform. This process is like breaking down a painting into its basic colors to understand what it is made of.

In the paper, the researchers used the Fourier transform to convert the time-domain data into frequency-domain data, effectively breaking down the complex signal into its constituent frequencies. By doing so, FTNS revealed the noise spectrum, showing which noise frequencies were present and how strong they were.

The researchers found that the FTNS method also handled various types of noise, including complex noise patterns that were challenging for other methods like DDNS to decipher.

While a more streamlined method, FTNS has some limitations, like minimum and maximum frequency constraints and the need for high-resolution time and coherence measurements. However, the researchers demonstrated that these limitations are far less constraining than DDNS’s.

Sun and his team at JILA are now experimentally testing the FTNS method in nitrogen-vacancy centers, often found within diamonds used as qubits. Simultaneously, Joe Zadrozny, Associate Professor of Chemistry at Ohio State University, and his team are working to implement FTNS in molecular qubits and magnets.

“We are super excited about our method’s ability to reveal the frequency-resolved conversation between a qubit or sensor and its environment—and even more about the new opportunities it offers,” says Montoya-Castillo.

“From the sensing perspective, we are working to establish how FTNS can show hard-to-see physical processes near a sensor, whether this is a color center in a crystal, like nitrogen vacancies in diamond, trapped ions, or molecular magnets. This is an exciting frontier as quantum sensors may enable imaging of complex biological processes, like protein folding, with unprecedented detail and temporal resolution.”

More information:
Arian Vezvaee et al, Fourier transform noise spectroscopy, npj Quantum Information (2024). DOI: 10.1038/s41534-024-00841-w

Citation:
Mapping noise to improve quantum measurements (2024, June 7)

Subscribe
Don't miss the best news ! Subscribe to our free newsletter :