Liquid metal microdroplets enable soft, flexible electric connections across and through circuit layers

Liquid metal microdroplets enable soft, flexible electric ...

If a phone or other electronic device were made of soft materials, how would that change its use? Would it be more durable? If hospital health monitoring equipment were made of less rigid components, would it make it easier for patients to wear?

While electronics of that type may still be far in the future, Virginia Tech researchers have developed an innovative method for constructing the soft electronic components that make them up. The focus of a project by the team of Michael Bartlett, principal investigator and associate professor in the Department of Mechanical Engineering, is on the circuits that manage all the electronic connections inside.

Published inNature Electronics, this novel technique uses liquid metal microdroplets to create a stair-like structure that forms small conductive passages called vias. These vias create electric connections through and across circuit layers without needing drilled holes in hardware, as previous techniques have.

“This brings us closer to exciting possibilities like advanced soft robotics, wearable devices, and electronics that can stretch, bend, and twist while maintaining high functionality,” Bartlett said.

The first author of the publication was Dong Hae Ho, a postdoctoral researcher working with Bartlett. The Virginia Tech team was joined in this study by colleagues Ling Li, associate professor at the University of Pennsylvania, and Chenhao Hu, a Ph.D. student on Li’s team.

Soft electronics, vias, and interconnects

Previous soft circuit research developed by Bartlett’s team replaces inflexible materials with soft electronic composites and tiny, electricity-conducting liquid metal droplets. These soft electronics are part of a rapidly emerging field of technology that gives gadgets a new level of durability.

In this project, researchers took on the problem of soft circuit boards, particularly the passing of electrical currents between the layers that stack on top of one another. This is important to make good use of electrical current in the tight space circuit boards occupy.

Virginia Tech team creates new method of flexing on electronics


(From left) Postdoctoral researcher Dong Hae Ho and Associate Professor Michael Bartlett examine a soft electronic made with their method of producing soft circuits. © Alex Parrish for Virginia Tech.

Whereas conventional rigid electronics utilize well-established techniques for creating vias, which are essential to make the multilayer electronics that are common today, they often require holes to be drilled through a circuit board, which works when rigid materials are used to connect those layers. In a flexible material where a punched hole might stretch open, controlling that current requires a different approach.

The team’s new technique makes no holes and uses liquid metal microdroplets to form soft vias and planar interconnects, creating electrical connections through and across circuit layers, overcoming these challenges. The process involves the directed stratification of liquid metal droplets within a photoresin. By leveraging irregularities that arise during ultraviolet exposure, the researchers create a stair-like structure that allows the droplets to controllably assemble in 3D.

This approach is highly versatile, and these liquid metal vias and interconnects can be implemented in several types of materials. They can go further and perform the fabrication approach multiple times and create more and more layers.

Utilizing a bug as a feature

In known methods of creating electronics and other micro- and nanotechnologies, during ultraviolet exposure, imperfections known as mask-edge abnormalities, or undercutting, typically present challenges in standard manufacturing. However, the researchers have turned this bug into a feature: The edges of the ultraviolet-exposed regions cause the liquid metal droplets to settle and stratify in a stair-like, vertical pattern.

This directed assembly allows the droplets to form a continuous pathway through the photoresin, connecting the top and bottom layers, which is then fully cured to lock the configuration in place. This process occurs simultaneously, and settlement of the droplets is quick, so that the process to make multiple vias takes less than a minute.

“By leveraging these otherwise unwanted edge effects, we can create soft, conductive vias that connect different circuit layers in a rapid and parallel fashion,” said Ho. “We can do this all while maintaining flexibility and mechanical integrity of the soft device.”

“By integrating with both in-plane and thru-plane circuit layers, it’s possible to create soft, flexible circuits with complex, multilayered architectures,” Bartlett said. “This enables new forms of soft electronics, where multiple soft vias and interconnects are created in a parallel and spatially controlled manner. This is crucial for advancing the field.”

More information:
Nature Electronics (2024). www.nature.com/articles/s41928-024-01268-z

Provided by
Virginia Tech

Citation:
Liquid metal microdroplets enable soft, flexible electric connections across and through circuit layers (2024, October 24)

Subscribe
Don't miss the best news ! Subscribe to our free newsletter :